|Ice Maker Repair Tips|
No ice cubes to cool your beverage because your fridge icemaker is on the fritz? You can buy a replacement icemaker and install it without breaking a sweat. It's simple.
If your icemaker stops working, there's no need to call the appliance repair service. First, locate the saddle valve that's clamped to the house water supply and turn it off and on a few times to break up any mineral buildup clogging the valve. If that doesn't work, unplug the refrigerator and remove the icemaker to make sure the water inlet at the back of the refrigerator isn't plugged with ice (just heat it with a hair dryer if it is). However, if the water supply isn't blocked and the refrigerator is older, it's time to replace the icemaker. According to appliance repair pros, most icemakers break down long before the refrigerator. The good news is that most replacement kits are simple to install.
Locate the model number on the wall of the refrigerator just inside the door, then buy a new icemaker at an appliance store or online (do a search for “appliance parts”).
Unplug the refrigerator and turn the water off, then take the old icemaker out and disconnect the wiring. Plug the new icemaker in hold it in position and screw it to the refrigerator wall. Pull the refrigerator out from the wall, disconnect the water supply from the inlet valve at the bottom of the refrigerator, then replace the old inlet valve. Inlet valves should be replaced when the icemaker is replaced, and are usually included with replacement kits. If not, order it separately.
Before you push the refrigerator back, turn the water on and check for leaks.
718-787-1301 Need Repair?